These axles are required if you want to run street wheels on the VELAR 2.0 Belt Drive.

The VELAR 2.0 comes set up for larger wheels from the factory. To mount street wheels, the original axle must be removed and replaced with this shorter street wheel axle set.

Let’s be absolutely clear before you buy:

• ✅ ONLY for VELAR 2.0 Belt Drive

• ❌ NOT compatible with VELAR 1.0

• ❌ Will NOT work on Direct Drive

• ❌ Will NOT work on any other ONSRA model

The VELAR 1.0 does NOT need this. It is already street wheel compatible. If you order these for a VELAR 1.0, they will not fit. Period.

Installation Notes

To swap the axle on the VELAR 2.0:

1. Locate the 3mm hex grub screw

2. Loosen the grub screw

3. Remove the original axle

4. Install the street wheel axle

5. Tighten the grub screw securely

This is a mechanical part. Basic tools and mechanical understanding are required.

Key Facts

• Compatibility: VELAR 2.0 Belt Drive only

• Purpose: Street wheel conversion

• Material: Precision machined steel

• Installation: Axle swap required

• Tool needed: 3mm hex key